Refine
Document Type
- Article (2) (remove)
Language
- English (2)
Has Fulltext
- yes (2)
Keywords
- Additive (1)
- Biofuel (1)
- Biogasgewinnung (1)
- Blatt (1)
- Circular economy (1)
- Eucalyptus kraft lignin (1)
- Flexible biogas production (1)
- Kreislaufwirtschaft (1)
- Methane production (1)
- Methanproduktion (1)
Faculty
- Fakultät 10 / Institut für Automation & Industrial IT (2) (remove)
Anaerobic digestion plants have the potential to produce biogas on demand to help balance renewable energy production and energy demand by consumers. A proportional integral (PI) controller is constructed and tuned with a novel tuning method to control biogas production in an optimal manner. In this approach, the proportional part of the controller is a function of the feeding rate and system's degree of stability. To estimate the degree of stability, a simulation‐based soft sensor is developed. By means of the PI controller, the requirement for gas storage capacity of the digester is reduced by approximately 30 % compared to a constant, continuous feeding regime of the digester.
Pelleted biomass has a low, uniform moisture content and can be handled and stored cheaply and safely. Pellets can be made of industrial waste, food waste, agricultural residues, energy crops, and virgin lumber. Despite their many desirable attributes, they cannot compete with fossil fuel sources because the process of densifying the biomass and the price of the raw materials make pellet production costly.
Leaves collected from street sweeping are generally discarded in landfills, but they can potentially be valorized as a biofuel if they are pelleted. However, the lignin content in leaves is not high enough to ensure the physical stability of the pellets, so they break easily during storage and transportation. In this study, the use of eucalyptus kraft lignin as an additive in tree-leaf pellet production was studied. Results showed that when 2% lignin is added the abrasion resistance can be increased to an acceptable value. Pellets with added lignin fulfilled all requirements of European standards for certification except for ash content. However, as the raw material has no cost, this method can add value or contribute to financing continued sweeping and is an example of a circular economy scenario.